Hi-Line Replacement Filter Element (Original aluminium Style)

Hi-line filter elements are available in the following grades

GRADE 2 Particle Removal down to 3 micron (99.99%)

GRADE 3 Oil Removal down to 0.5 mg/m @ 20˚C & 7 bar Particle Removal down to 1 micron (99.999%)

GRADE 4 Oil Removal down to 0.01 mg/m @ 20˚C & 7 bar Particle Removal down to 0.01 micron (99.99999%)

GRADE 5 Oil Removal down to 0.003 mg/m @ 20˚C & 7 bar

Hi-line elements are manufactured with ‘pleated’ filter media. Pleated media has four times the amount of cross-sectional surface area compared to conventional wrapped or rolled media.

The pleated media gives a much lower pressure drop. This in turn will save energy as the compressor doesn’t have to work as hard to get the air through the filter and with four times more media significantly longer service life is obtained.

These elements provide impressive filtration efficiencies from 99.99% to 99.99999% with a further grade being specific to oil/aerosol removal down to 0.003mg/m utilising activated carbon technology.