Reference: 2019-4965
Brand: Kelm
1/8" BSP Taper Male x 6mm Outside Diameter
1/8" BSP Taper Male x 6mm Outside Diameter
- There are no more items in your cart
- Shipping
- Total £0.00
- Fittings & Adapters
- Threaded Adaptors
- Push-in Fittings, Metric
- One Touch Plastic Push-in
- Male Stud
- Female Stud
- 90° Stud Swivel Elbow
- Equal Straight Connector
- Reducing Straight Connector
- Equal 90° Elbow Connector
- Equal Tee Connector
- Equal Cross Connector
- Equal Bulkhead Connector
- Reducing Stem x Tube
- Tube Plug
- Tube x Tube Venting Manual Shut-off Valve
- Tube x Tube Uni-Directional Manual Flow Controller
- Female Bulkhead
- Threaded Centre Leg Tee
- One Touch Plastic Push-in
- Hosetails
- Valves & Control
- Couplings
- Pipe & Tubing
- Tools
- Clearance
- Filters, Regulators, Gauges
- Air Compressors
Reference: RL21/21K
1/2" BSPT Male x 1/2" BSPP Female Adaptor
1/2" BSPT Male x 1/2" BSPP Female Adaptor
Reference: NO17-20
Brand: C-Cure
17mm- 20mm
17mm Minimum Diameter x 20mm Maximum Diameter x 3/4" Nominal Bore
12mm tee
Secure On-Line shopping & Payments
Free delivery on orders over £50.00 exVAT
Collect from local trade counters
Description
12mm Outside Diameter, Pneumatic One Touch Plastic Push-in Metric Tube Fitting, Equal, Tee Connector, Plastic/Brass Nickel Plated, Working Temperature 0°C to +60°C, Maximum Working Pressure 10 bar, FT Pro
Media: Air & vacuum only. Negative Pressure: -750mm Hg (10Torr).
Product Details
2019-8438
29 Items
16 other products in the same category:
Reference: 6310-18-18
1/8"BSPT x 1/8"BSPF Brass Ball Valve Gas Mini
1/8" BSP Tapered Male x 1/8" BSP Parallel Female, Ball Valve, Type 6310, Gas Mini, Brass, BS EN331 Standard, PTFE Seal, Working Temperature -20°C to +80°C, Maximum Working Pressure 20 bar, Aignep
Reference: G50-10C
1/4"BSPT 0-10B 50MM ABS BTM GAU 0-160PSI
1/4" BSP Tapered Male, ABS Case, Bottom Connection, Dry Gauge, 50mm Dial Diameter, Working Pressure 0-160 psi, Working Pressure 0-10 bar, FT Pro
Reference: 05491
Brand: SIP
SIP DD 1.5hp 24ltr Ultra Low Noise Oil-Free Compressor
6.5 CFM - 8 BAR - 24Lt
The SIP QT AIR DD 1.5hp 24ltr Ultra Low Noise Oil-Free Direct Drive Compressor is an innovative ultra low noise air compressor which features a slow-running 4-pole motor pump unit for longer life performance.
KEY FEATURES
8CFM piston displacement and 6.5CFM Free Air Delivery (FAD)
Ultra low noise twin-cylinder motor pump unit...
Reference: PCFF04-04
1/2" BSPT Female Check Valve
1/2" BSP Taper Female x 1/2" x BSP Taper Female Pneumatic Push-in Valve, Check Valve, Working Temperature 0°C to +60°C, Maximum Working Pressure 10 bar, FT Pro
Reference: 728E2002
EnzAir EZ11/15 Maintenance Kit 728E2002
Maintenance kits for EZ11/15
Contains:
*Air Filter
*Oil Filter
*Seperator
Reference: SA16
EnzAir SA16 Refrigeration Compressed Air Dryer 43 CFM
The EnzAir SA16 delivers a 3°C pressure dew point and operates reliably in ambient temperatures up to 40°C, meeting ISO 8573-1 Class 4 standards. Its compact, plug-and-play design ensures efficient, hassle-free installation and operation.
Key Features
3°C pressure dew point (ISO 8573-1 Class 4)
Compact, energy-efficient design
Plug & play...
Reference: 2046-7170
4mm OD x M6 Metric Male Stud Elbow
M6 Metric Male x 4mm Outside Diameter, Pneumatic One Touch Plastic Push-in Metric Tube Fitting, 90° Stud Swivel Elbow, Plastic/Brass Nickel Plated, Working Temperature 0°C to +60°C, Maximum Working Pressure 10 bar, FT Pro
Reference: 728E4001
Enzair ScrewShield Pro 1L
Introducing EnzAir ScrewShield Pro, a cutting-edge compressor fluid specially formulated for optimal performance in EnzAir screw compressors. Engineered with advanced ashless additive technology, this premium oil provides exceptional protection and efficiency for the full range of EnzAir screw compressors.
Reference: WN-14
1/4" BSPT Male Welding Nipple
1/4" BSP Tapered Male, Welding Nipple, 150lb Tube & Pipe Fitting, 30mm Length, 316 Stainless Steel, Maximum Working Pressure 10 bar, Haitima
Reference: 6300-14
1/4"BSPF BSPP Brass Ball Valve Gas Mini
1/4" BSP Parallel Female, Type 6300, Gas Mini, Brass, BS EN331 Standard, PTFE Seal, Working Temperature -20°C to +80°C, Maximum Working Pressure 20 bar, Aignep