Reference: 2019-4965
Brand: Kelm
1/8" BSP Taper Male x 6mm Outside Diameter
1/8" BSP Taper Male x 6mm Outside Diameter
- There are no more items in your cart
- Shipping
- Total £0.00
- Fittings & Adapters
- Threaded Adaptors
- Push-in Fittings, Metric
- One Touch Plastic Push-in
- Male Stud
- Female Stud
- 90° Stud Swivel Elbow
- Equal Straight Connector
- Reducing Straight Connector
- Equal 90° Elbow Connector
- Equal Tee Connector
- Equal Cross Connector
- Equal Bulkhead Connector
- Reducing Stem x Tube
- Tube Plug
- Tube x Tube Venting Manual Shut-off Valve
- Tube x Tube Uni-Directional Manual Flow Controller
- Female Bulkhead
- Threaded Centre Leg Tee
- One Touch Plastic Push-in
- Hosetails
- Valves & Control
- Couplings
- Pipe & Tubing
- Tools
- Clearance
- Filters, Regulators, Gauges
- Air Compressors
Reference: RL21/21K
1/2" BSPT Male x 1/2" BSPP Female Adaptor
1/2" BSPT Male x 1/2" BSPP Female Adaptor
Reference: NO17-20
Brand: C-Cure
17mm- 20mm
17mm Minimum Diameter x 20mm Maximum Diameter x 3/4" Nominal Bore
1/8" BSPT Female Check Valve
1/8" BSP Taper Female x 1/8" x BSP Taper Female Pneumatic Push-in Valve, Check Valve, Working Temperature 0°C to +60°C, Maximum Working Pressure 10 bar, FT Pro
Secure On-Line shopping & Payments
Free delivery on orders over £50.00 exVAT
Collect from local trade counters
Product Details
PCFF01-01
6 Items
16 other products in the same category:
Reference: 728E2001
EnzAir EZ5/7 Maintenance
Maintenance kits for EZ5/7
Contains:
*Air Filter
*Oil Filter
*Seperator
Reference: PS-38
3/8" BSP male plastic silencer
3/8" BSP Parallel Male, Silencer, Plastic Porus Polyethylene, Working Temperature 0°C to +75°C, Maximum Working Pressure 10 bar, FT Pro
Reference: 728E4005
EnzAir ScrewShield Pro 5L
Introducing EnzAir ScrewShield Pro, a cutting-edge compressor fluid specially formulated for optimal performance in EnzAir screw compressors. Engineered with advanced ashless additive technology, this premium oil provides exceptional protection and efficiency for the full range of EnzAir screw compressors.
Reference: UCP12P
EnzAir UCP12P 3/4" In Line Filter 0.01 Micron (Dust Only) 42 CFM Auto Drain
P-Grade filter for ultra-efficient dust removal down to 0.01μm, protecting critical equipment and maintaining system performance. Heavy-duty cast body with fully automatic drain. Leak-tested and ISO 8573-1:2010 compliant.
Max pressure: 16 bar | Part No: UCP12P
Reference: WN-12
1/2" BSPT Male Welding Nipple
1/2" BSP Tapered Male, Welding Nipple, 150lb Tube & Pipe Fitting, 35mm Length, 316 Stainless Steel, Maximum Working Pressure 10 bar, Haitima
Reference: 728E2054
EnzAir EZ11/15 Maintenance Kit 728E2054 with EnzAir Screwshield Pro Compressor Oil
Maintenance kits for EZ11/15
Contains:
*Air Filter
*Oil Filter
*Seperator
*Oil
Reference: 728E4001
Enzair ScrewShield Pro 1L
Introducing EnzAir ScrewShield Pro, a cutting-edge compressor fluid specially formulated for optimal performance in EnzAir screw compressors. Engineered with advanced ashless additive technology, this premium oil provides exceptional protection and efficiency for the full range of EnzAir screw compressors.
Reference: 2046-7170
4mm OD x M6 Metric Male Stud Elbow
M6 Metric Male x 4mm Outside Diameter, Pneumatic One Touch Plastic Push-in Metric Tube Fitting, 90° Stud Swivel Elbow, Plastic/Brass Nickel Plated, Working Temperature 0°C to +60°C, Maximum Working Pressure 10 bar, FT Pro
Reference: UCP12P
EnzAir UCP12P 1/2" In Line Filter 0.01 Micron (Dust Only) 42 CFM Auto Drain
P-Grade filter for ultra-efficient dust removal down to 0.01μm, protecting critical equipment and maintaining system performance. Heavy-duty cast body with fully automatic drain. Leak-tested and ISO 8573-1:2010 compliant.Max pressure: 16 bar | Part No: UCP12P
Reference: PCFF01-01
1/8" BSPT Female Check Valve
1/8" BSP Taper Female x 1/8" x BSP Taper Female Pneumatic Push-in Valve, Check Valve, Working Temperature 0°C to +60°C, Maximum Working Pressure 10 bar, FT Pro
1/8" BSP Taper Female x 1/8" x BSP Taper Female Pneumatic Push-in Valve, Check Valve, Working Temperature 0°C to +60°C, Maximum Working Pressure 10 bar, FT Pro